Pioneer Elite SC-99 Operating Instructions Manual page 21

03
! Speaker System setting: 7.2.4ch SB Pre out, 7.2.4ch Front Pre out
— Speaker Setting TFw: Dolby Sp (Front) and TBw: Dolby Sp (Surr)
TFwL
TBwL
L
SL
SW1
SBL
— Speaker Setting TFw: Dolby Sp (Front) and TBw: Dolby Sp (SB)
TFwL
L
SL
SW1
TBwL
SBL
Always use the top forward (TFwL/TFwR) and top backward (TBwL/TBwR) speakers as a combination. When you set
either of these speakers to NO in Speaker Setting, the other speaker will also be automatically set to NO.
Dolby Enabled Speaker
Dolby enabled speakers bring a new sense of height and immersion to the listening experience without installa-
tion of overhead speakers.
Listener
TFwR
C
TBwR
R
SR
SW2
SBR
TFwR
C
R
SR
SW2
TBwR
SBR
Ceiling
Dolby Enabled
Speaker
[C] 9.2.2 channel surround system (Top middle/Front height) connection
! Speaker System setting: 9.2.2ch TMd/FH
TMdL
FWL
SL
SBL
A 9.2.2 ch surround system connects the left and right front speakers (L/R), the center speaker (C), the left and
right top middle speakers (TMdL/TMdR), the left and right front height speakers (FHL/FHR), the left and right
front wide speakers (FWL/FWR), the left and right surround speakers (SL/SR), the left and right surround back
speakers (SBL/SBR), and the subwoofers (SW 1/SW 2).
It is not possible to produce sound simultaneously from the top middle speakers and the front height speakers.
The speakers from which sound is output can be switched using the OUT P. button. For details, see
the speaker terminals on page 93 .
Front wide is output from the PRE OUT EXTRA 2 terminals of the receiver. Connect the EXTRA 2 terminal to the
external amplifier, and connect the external amplifier to the front wide speaker.
It is necessary to connect to any one of the top middle, front height, front wide, or surround back speakers to play
Dolby Atmos.
[D] 7.2.4 channel surround (Surround back Pre Out) connection
! Speaker System setting: 7.2.4ch SB Pre out
TBwL
SL
SBL
A 7.2.4 ch surround system connects the left and right front speakers (L/R), the center speaker (C), the left and right
top forward speakers (TFwL/TFwR), the left and right top backward speakers (TBwL/TBwR), the left and right sur-
round speakers (SL/SR), the left and right surround back speakers (SBL/SBR), and the subwoofers (SW 1/SW 2).
Surround back is output from the PRE OUT EXTRA 2 terminals of the receiver. Connect the EXTRA 2 terminal to
the external amplifier, and connect the external amplifier to the surround back speaker.
It is necessary to connect to any one of the top forward, top backward, or surround back speakers to play Dolby
Atmos.
21
Connecting your equipment
TMdR
FHR
FHL
L R FWR
C
SR
SW1 SW2
SBR
TBwR
TFwL TFwR
L R
C
SR
SW1 SW2
SBR
Switching