Pioneer Elite SC-99 Operating Instructions Manual page 92

09
Setting What it does
Reduces noise in the luminance (Y) signal.
YNR
c
<e>
<f>
d
(The image is only an example for checking the effect.)
Reduces noise in the input's color (C) signal.
CNR
c
<e>
<f>
d
(The image is only an example for checking the effect.)
Reduces block noise (block-shaped distortion generated upon MPEG
compression) in the picture.
BNR
<e>
c
<f>
d
(The image is only an example for checking the effect.)
Reduces mosquito noise (distortion generated at the contours of the
picture upon MPEG compression) in the picture.
MNR
<e>
c
<f>
d
(The image is only an example for checking the effect.)
Adjusts how sharp edges appear.
DETAIL
c
<e>
<f>
d
(The image is only an example for checking the effect.)
Option(s) Setting
c 0 to +8 d
BRIGHT
Default: 0
(Brightness)
<e>
<f>
c 0 to +8 d
Default: 0
CONTRAST
<e>
<f>
c 0 to +8 d
Default: 0
HUE
<e>
<f>
c 0 to +8 d
Default: 0
CHROMA
c 0 to +8 d
(Chroma Level)
Default: 0
<e>
<f>
BLK SETUP
(Black Setup)
<g>
92
What it does
Adjusts the overall brightness.
c
0
d
(The image is only an example for checking the effect.)
Adjusts the contrast between light and dark.
c
0
d
(The image is only an example for checking the effect.)
Adjusts the red/green balance.
c
0
d
(The image is only an example for checking the effect.)
Adjusts saturation from dull to bright.
c
0
d
(The image is only an example for checking the effect.)
Sets the black level according to the video input signal.
Normally select 7.5. If the dark parts of the picture are all black with
this setting, select 0.
Using other functions
Option(s)
c –6 to +6 d
Default: 0
c –6 to +6 d
Default: 0
c –6 to +6 d
Default: 0
c –6 to +6 d
Default: 0
0
7.5