Successful W-Dmx™ Connections; Standard 2.4Ghz Mode: Selecting The Channel Group - Blizzard Lighting COLORISE Exa Manual

Table of Contents

Advertisement

4 .) Successful W-DMX™ Connections
The LED status indicator will blink, then turn white if searching for a signal. When a
signal connection is established, the LED on the fixture will be solid GREEN, if signal is
lost the LED will flash RED.
W-DMX™ Setup Examples:
1.) One transceiver with multiple receiver setups:
a.) Power on all units.
b.) On the receiving W-DMX fixtures, follow the previous instructions to pair them
with the transmitting unit.
2.) Multiple transceiver setups, with multiple receivers; e.g. 3 groups consisting of a
transceiver & receiver(s) named A, B, and C:
a.) Turn power off of all units.
b.) Group "A" gets powered on, then follow step 1 above.
c.) Group "B" gets powered on, then follow step 1 above.
d.) Group "C" gets powered on, then follow step 1 above.

5.) Standard 2.4GHz Mode: Selecting the Channel Group

1. After selecting Standard 2.4GHz Mode in Step 3 on the previous page, the fixture is ready
and waiting for your input to select the frequency group to match that of your transmitting
source.
a.) Tap the <ENTER> button repeatedly to scroll through the 7 color group frequencies:
• GROUP 1:
• GROUP 2:
• GROUP 3:
• GROUP 4:
• GROUP 5:
• GROUP 6:
• GROUP 7: WHITE
b.) While your chosen group number/color is illuminated on the status LED, press and
hold the <ENTER> button for 3 seconds.
2. The LED on the transmitter will blink
the receiver. The status LED on the receiving fixtures will be illuminated in the color of the
group that it is set on until communication is established.
3. Once the clearest channel is auto-selected, the status LEDs will blink quickly on both the
transmitter and receiver. NOTE: The color of the status LED DURING operation does not
indicate channel group, instead it indicates whether the unit is transmitting or receiving.
That's It!
Colorise™ EXA Manual Rev. A
RED
NOTE: "GROUP" number also
GREEN
corresponds to the "GROUP" setting
YELLOW
on our LightCaster™ wireless DMX
BLUE
transceiver, wiCICLE™ transmitter,
VIOLET
and all Blizzard Skywire™ wireless
CYAN
controllers.
RED
Page 11
slowly until communication is established with
© 2015 Blizzard Lighting, LLC

Advertisement

Table of Contents
loading

Table of Contents