PAS-225/SB
When carburetor adjustment is completed, the cutting
attachment should not move at idle, otherwise serious personal
injury may result.
Lubrication
Level 1.
Parts Required: Lithium Based Grease.
Drive Shaft Upper
1.
Loosen clamping knob (A).
2.
Pull locator pin (B) and rotate ¼
turn counterclockwise to lockout
position.
3.
Remove attachment.
4.
Remove coupler from upper drive
shaft assembly by loosening
clamping screw (C) and
removing set screw (D).
X7722278004
© 11/2016 ECHO Inc.
MAINTENANCE
C
A
A
D
C
D
B
B
37