Equipment - Echo PAS-225 Operator's Manual

PAS-225/SB

Equipment

Use only ECHO attachments. Serious injury may result from the
use of a non-approved attachment combination. ECHO, INC. will
not be responsible for the failure of cutting devices,
attachments or accessories which have not been tested and
approved by ECHO. Read and comply with all safety
instructions listed in this manual and safety manual.
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or
replace as needed.
• Inspect guards and shields for damage and to ensure that they are
securely in place. Replace if damaged or missing.
• Check that the attachment is firmly attached and in safe operating
condition.
• Check that handle and harness (if included) are adjusted for safe,
comfortable operation. See Assembly Section for proper adjustment.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
ALWAYS stop engine, disconnect spark plug, and make sure all
?
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
DO NOT start or operate unit unless all guards and protective
?
covers are properly assembled to unit.
NEVER reach into any opening while the engine is running.
?
Moving parts may not be visible through openings.
Periodically check fuel system (fuel lines, vent, grommet, fuel
tank, and fuel cap) for leaks especially if the unit is dropped. If
damage or leaks are found, do not use unit, otherwise serious
personal injury or property damage may occur. Have unit
repaired by an authorized servicing dealer before using.
X7722278004
© 11/2016 ECHO Inc.
SAFETY
13