Operation With Blades - Echo PAS-225 Operator's Manual

OPERATION
Mixing Instructions
1. Fill an approved fuel container
with half of the required
amount of gasoline.
2. Add the proper amount of
2-stroke oil to gasoline.
3. Close container and shake to
mix oil with gasoline.
4. Add remaining gasoline, close
fuel container, and remix.
Spilled fuel is a leading cause of hydrocarbon emissions. Some
states may require the use of automatic fuel shut-off containers to
reduce fuel spillage.
• Empty the fuel tank prior to storing the unit. Return
unused fuel to an approved fuel storage container.
• Fuel storage laws vary by locality. Contact your local
government for the laws affecting your area. As a
precaution, store fuel in an approved, airtight
container. Store in a well-ventilated, unoccupied
building, away from sparks and flames.
• Stored fuel ages. Do not mix more fuel than you expect to use in 30 days,
or 90 days, when a fuel stabilizer is added.
Stored two-stroke fuel may separate. ALWAYS shake fuel container
thoroughly before each use.

Operation With Blades

Blade use DEMANDS specific Brush Cutter configuration.
Operation without specified shield, barrier bar or U-handle, and
harness can result in serious personal injury. Follow installation
instructions.
PARTS REQUIRED FOR THESE BLADES:
Pro Maxi-Cut Grass/
Weed Blade
Support Handle, w/ or w/
o Barrier Bar
24
Fuel to Oil Mix – 50:1 Ratio
Gas
Gallons
1
2
5
Rigid Plastic Tri-Cut
Grass/Weed Blade
U-Handle or Support
Handle w/Barrier Bar
PAS-225/SB
US
Oil Gas
Oz. Liter
2.6 5
5.2 10
13 25
Metal Blade
U-Handle or Support
Handle w/Barrier Bar
© 11/2016 ECHO Inc.
Metric
Oil
CC.
100
200
500
X7722278004