EMISSION CONTROL
PAS-225/SB
EMISSION CONTROL (EXHAUST &
EVAPORATIVE)
CARB And EPA Emissions Control Information
The emission control system for the
engine is EM (engine modification)
and, if the second to last character of
the Engine Family on the Emission
Control Information label (sample
below) is "B", "C", "K", or "T", the
emission control system is EM and
TWC (3-way catalyst). The fuel tank/
fuel line emission control system is EVAP (evaporative emissions).
Evaporative emissions for California models are only applicable to fuel
tanks.
An Emission Control Label is
located on the engine. (This is an
EXAMPLE ONLY, information on label
varies by engine FAMILY).
Product Emission Durability
(Emission Compliance Period)
The 50 or 300 hour emission compliance period is the time span selected by
the manufacturer certifying the engine emissions output meets applicable
emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
14
X7722278004
© 11/2016 ECHO Inc.