MAINTENANCE
4.
Use a brush to remove dirt from
the cylinder fins.
5.
Remove ignition wires from clip
for cleaning.
6.
Remove grass and leaves from
the grid between the recoil
starter and fuel tank.
7.
Assemble components in reverse
order.
Exhaust System
Spark Arrestor Screen
Level 2.
Parts Required:
1.
Remove spark plug lead.
2.
Remove engine cover (B).
3.
Place piston at Top Dead Center
(TDC) to prevent carbon/dirt from
entering cylinder.
34
Spark Arrestor Screen, Gasket
PAS-225/SB
B
X7722278004
© 11/2016 ECHO Inc.