Canon imageRUNNER 2530 Service Manual Digest page 84

Card reader test <6-3: NCR sts>
Press numeric keypad key 3 on the FACULTY menu to select the card reader test. In this test,
verify the successful operations of the card reader.
[1]
Press numeric keypad key 3
NCR Sts：12345678
DPT MGN OK RDY 1234
[2] [3] [4] [5] [6]
[1] Card reader and card availability indication
Card available: Eight-digit card ID
No card: Card None
No card reader available: NCR None
[2] Card type and card reader status indication
DPT: Department card
PRC: Unit pricing card
MAX: Upper limit setting card
ERS: Erased card
SRV: Service card
(No indication): No card
[3] Card type
MGN: Magnetic card
OPT: Optical card
Line signal reception test <6-9: LINE DETECT>
Press numeric keypad key 9 on the FACULTY menu to select the line signal reception test. In
this test, verify the successful operations of the NCU signal sensor and the frequency counter.
Menu 1 detects the CI state, while menu 3 detects the CNG signal.
•
Test menu 1
Press numeric keypad key 1 on the LINE DETECT menu to select test menu 1. When CI is
detected on the telephone line connection terminal, the touch panel (LCD) display changes
from OFF to ON, indicating the received frequency. The touch panel (LCD) also displays
the on-hook or off-hook state of an external telephone set as detected. The touch panel
(LCD) displays, from left to right, CI, CI frequency, hook port and FC with indications of 1:
ON and 0:OFF.
•
Test menu 2
Press numeric keypad key 2 on the LINE DETECT menu to select test menu 2. When the
CNG signal is detected on the telephone line connection terminal, the touch panel (LCD)
[4] Can status
OK: Normal scan
ERR: Scan error
NG: Nonstandard error
(No indication): No card
[5] Equipment status
IN: Initialization in progress
RDY: Ready
[6] Card reader version indication
Four-digit number
F-4-15 F-4-15
display changes from OFF to ON, indicating the received frequency. The touch panel
(LCD) displays the status of CML, CNG and FED detection, from left to right, with ON/OFF
indications. Numeric keypad key 2 turns on the CML relay to detect CNG.
•
Test menu 3
Press numeric keypad key 3 on the LINE DETECT menu to select test menu 3. When the
CNG signal is detected on the telephone line connection terminal, the touch panel (LCD)
display changes from OFF to ON, indicating the received frequency. The touch panel
(LCD) displays the status of CML, CNG and FED detection, from left to right, with ON/OFF
indications. Numeric keypad key 3 turns off the CML relay to detect CNG.
4
4-51