Numeric Parameter Settings (Numeric Prama.) - Canon imageRUNNER 2530 Service Manual Digest

Item1 Item2 Item3 Item4
READER OPTION BODY SENS-CNF
MODELSZ2
SZDT-SW
DFDST-L1 0
DFDST-L2 0
KSIZE-SW
USER SIZE-DET
FEEDER ADJUST DOCST
LA-
SPEED
DOC-
LNGH
FUNCTION FEED-
CHK
CL-CHK
CL-ON
FAN-CHK
4
FAN-ON
SL-CHK
SL-ON
MTR-ON
ROLL-
CLN
FEED-
ON
4-20
Initial Appropriate Description
setting guideline
Setting of the document
detection sensor placement
not used
not used
0 to 255 Dirt detection level adjustment
(between documents) during
ADF use
0 to 255 Dirt detection level adjustment
(upon job completion) during
ADF use
not used
not used
-50 to 50 Adjusting the original stop
position for ADF pickup (original
tray pickup)
-30 to 30 Adjusting the original feeding
speed in stream reading
Correcting the paper length in
extra length/indeterminate mode
with ADF
Checking the passage of paper
for ADF
not used
not used
Checking the ADF cooling fan
Starting the fan operation
Checking the ADF solenoid
Starting the solenoid operation
Starting the motor operation
ADF roller cleaning mode
Checking the passage of paper
with ADF
■

Numeric Parameter Settings (Numeric Prama.)

● <033Vertical scan magnification correction>
Correct the magnification of vertical scanning of a book. The larger the adjustment value, the
more the image stretches in the vertical scanning direction.
● <034: Horizontal scan magnification correction>
Correct the magnification of horizontal scanning of a book. The larger the adjustment value,
the more the image stretches in the horizontal scanning direction.
● <047: Vertical scan magnification correction (when scanning on a
document fed from ADF)>
Correct the magnification of vertical scanning of a document fed from the ADF. The larger the
adjustment value, the more the image stretches in the vertical scanning direction.
● <048: Horizontal scan magnification correction (when scanning on a
document fed from ADF)>
Correct the magnification of horizontal scanning of a document fed from the ADF. The smaller
the adjustment value, the more the image stretches in the horizontal scanning direction.
● <193: ADF special standard-sized paper: LGL misidentification-
ready>
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because
it is misidentified as "LEGAL").
0 : LEGAL
T-4-32 T-4-32
1 : FOOLSCAP
2 : M_OFICIO
3 : A_FOOLSCAP
4 : FOLIO
5 : G_LEGAL
6 : A_OFICIO
7 : B_OFICIO
8 : OFICIO
9 : E_OFICIO