Lms; Configuration; Outline; Details - Canon imageRUNNER 2530 Service Manual Digest

#LMS

Configuration

■
Group Item Default Setting range Description
INACTIVE ST-SEND 0 0 - 1
TR-SEND
ST-BRDIM 0 0 - 1
TR-BRDIM
ST-ERDS 0 0 - 1
TR-ERDS
ST-PCL 0 0 - 1
TR-PCL
ST-EAM 0 0 - 1
TR-EAM
ST-ELA 0 0 - 1
TR-ELA
ST-SPDF 0 0 - 1
TR-SPDF
ST-PS 0 0 - 1
TR-PS
To display installation state of SEND function
when transfer is displayed.
The 24 digits of license transfer numbers are
displayed.
To display installation state of BarDIMM when
transfer is disabled.
The 24 digits of license transfer numbers are
displayed.
To display installation state of third party
expansion function of E-RDS when transfer is
disabled.
The 24 digits of license transfer numbers are
displayed.
To display installation state of PCL function
when transfer is disabled.
The 24 digits of license transfer numbers are
displayed.
To display installation state of EAM function
when transfer is disabled.
The 24 digits of license transfer numbers are
displayed.
To display installation state of ELA function
when transfer is disabled.
The 24 digits of license transfer numbers are
displayed.
To display installation state of transmission
function for SEND searchable PDF when
transfer is disabled.
The 24 digits of license transfer numbers are
displayed.
To display installation state of PS function when
transfer is disabled
The 24 digits of license transfer numbers are
displayed.
Group Item Default Setting range Description
ERASE SEND 0 0 - 1
BRDIM 0 0 - 1
ERDS 0 0 - 1
PCL 0 0 - 1
EAM 0 0 - 1
ELA 0 0 - 1
SPDF 0 0 - 1
PS 0 0 - 1
■

Outline

1. Validate an optional function which has been installed but has not been validated based on
the license key issued by a license issue server (hereinafter called "LMS").
2. Invalidate the function for which a license has been already set up.
■

Details

1. Validate a license by entering the license issued by LMS via the local UI.
2. The license key issued by LMS cannot be entered via the remote UI.
3. Invalidate a license (Set the function to OFF) via the service mode.
4. Validate a license via the service mode.
5. A license with restriction (with an expiration date, restriction in the number of licenses) is
not supported. (Restriction information is not read.)
6. Some optional functions installed are in dependent relationship with each other. For
example, when using [Function A], [Function B] should be available. In this case, [Function
B] is called a slave option of [Function A]. Installation of the slave option fails when it is
To display installation state of SEND function
when non-transfer is displayed.
To display installation state of BarDIMM when
non-transfer is disabled.
To display installation state of third party
expansion function of E-RDS when non-transfer
is disabled.
To display installation state of PCL function
when non-transfer is disabled.
To display installation state of EAM function
when non-transfer is disabled.
To display installation state of ELA function
when non-transfer is disabled.
To display installation state of transmission
function for SEND searchable PDF when non-
transfer is disabled.
To display installation state of PS function when
non-transfer is disabled
T-4-47 T-4-47
4-35
4