Sleep Timer - Sangean WFR-27C Instruction Manual

Sleep timer

Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting can be
adjusted between 15 and 120 minutes in 15 minute increments.
1. Press the Menu button and rotate the Tuning Control Rotary until 'Main menu' is highlighted.
Press the Tuning Control Rotary to enter the menu.
2. Rotate the Tuning Control Rotary until 'Sleep' is highlighted. Press the Tuning Control Rotary to
enter the setup. 'Sleep off' will appear on the display.
3. Rotate the Tuning Control Rotary to select the desired sleep time. The options are 15 to 120
minutes in 5 minutes increment. Use the OFF option to cancel the sleep function.
4. Your radio will switch off after the preset sleep time has elapsed.
5. Your radio will switch into standby mode after the preset time has elapsed. An active sleep
timer is shown using a small timer indicator at the bottom of the playing displays. This indicator
also shows the sleep time remaining before the radio switches itself into standby mode.
6. To cancel the sleep time before the preset time has elapsed and to turn off the radio, press the
Standby button to turn the unit off manually. To cancel the sleep timer and leave the radio
playing, go back into the sleep timer settings (steps 1 to 3 above) and select the Off option in
step 3. Alternatively, simply press the Standby button twice in succession to cancel the timer
and switch the radio back on again.
Alarm 1
15 minutes
FM
1
105.10MHz
FM Radio
1 2
Set sleep time
1,2
Sleep OFF
Main menu
DAB
FM
Sleep
6
Alarms
System settings
GB
11:00
>
72