Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sangean WR-12BT
Summary of Contents for Sangean WR-12BT
- Page 1 WR-12BT 中文 Version 1...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 3 Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.
- Page 4 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus. Excessive sound pressure on ear- and headphones could impair the hearing ability. Higher setting that idle on the equalizer leads to higher signal voltages on the output for ear and headphones.
- Page 6 Controls Power button Band selecting rotary Dial scale Dial indicator Dial marker Volume control Treble control Bass control Speaker Tuning LED indicator Tuning control F-type external antenna terminal AM external antenna terminal Subwoofer speaker AC main power switch AC power cord socket Dimmer control Headphone socket AUX IN socket...
-
Page 7: Power Your Radio
Power your radio AC operation Before you plug the AC cord into the radio, make sure the AC voltage is correct. Insert the plug on the end of the supplied power cord into the AC power socket on the back of the radio and turn on the main power switch. -
Page 8: Operating Your Radio - Fm
Operating your radio FM . Make sure you have set up the FM antenna in advance and turn on the main power switch in the rear of the unit. 2. Press the power button located in the front panel. 3. Rotate the band selecting rotary to the FM (MONO) or ST(FM stereo). -
Page 9: Headphone Use
Operating your radio AM . Press the power button located in the front panel. 2. Rotate the Tuning Control to select the desired station. In AM mode, the tuning scale is marked in kHz (Kilohertz). The tuning LED will appear brightest when best tuning has been achieved. 3. -
Page 10: Aux In Socket
AUX IN socket Connect a stereo or mono audio source (like CD walkman, iPod or digital media music player) to this input to listen the audio program via the speaker. Dimmer control The brightness of the dial scale may be adjusted. If you use the unit in the bedroom, you may prefer a higher brightness level than the standard setting. -
Page 11: Listening To Bluetooth Music
WR-2BT. Note: If there are 2 Bluetooth devices searching for WR-2BT, it will show its availability on both devices. However, if one device links with the WR-12BT first, then the other Bluetooth device won't find the WR-12BT on its list. - Page 12 Note: If your Bluetooth-enabled device is temporarily disconnected to your WR-2BT. As long as the disconnection last within 7 minutes, your device can re-connect with your radio again automatically. If the disconnection last more than 7 minutes, then you need to manually reconnect your device again to the radio. Be aware that during the period of disconnection, no other Bluetooth device can pair or link with your radio.
-
Page 13: Specifications
Specifications AC Power: AC 120 V/60 Hz/50W (max) (US version) AC 230 V/50 Hz/50W (max) (European version) Frequency Coverage: FM 87.50 - 08 MHz AM 520 - 70 kHz AUX-IN: 3.5mm diameter, stereo Internal Antenna System: AM Built-in ferrite aerial FM Built-in wiring aerial External antenna terminal: AM antenna terminal... - Page 14 Speaker: Stereo: 2.25inches 8 ohm x 2 Subwoofer: 3.5inches 8 ohm x Headphones socket: 3.5 mm dia. Stereo jack Stereo output Output power: 3mW + 3mW (impedance 32ohm) The company reserves the right to amend the specification without notice. If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste.