To Display And Change Temperature Format (°F/°C) - andrews 24/39 Installation And Service Manual

10 Appendix
Fig. 66
Fig. 67
Fig. 68
Fig. 69
86
"Setpoint" flashes
Step 4: To lower the temperature setpoint, press the
"Setpoint" stops flashing
Step 5: When the desired setpoint is reached on the water
10.4.7 To display and change temperature format
Step 1: While in "Service Mode", press "Select" button until
"F/°C" flashes
Step 2: Press "Set" button to change temperature format.
"Temperature Down" button until the desired
temperature is shown on the water heater display.
heater display, press the "Set" button to confirm the new
setpoint. "Setpoint" stops flashing in the water heater
display.
(°F/°C)
To change temperature format in display
from °F to °C or °C to °F:
"°F/°C" is shown in the upper right portion of the water
heater display.
"°F/°C" symbol will flash in the water heater display.
Issue 2 14/07/16