To Change The Maximum Setpoint Limit (Max Setpoint) For The Temperature Setpoint - andrews 24/39 Installation And Service Manual

Fig. 54
Fig. 55
Fig. 56
Fig. 57
Issue 2 14/07/16
10.4.3 To change the maximum setpoint limit (max
Step 1: In service mode press the "Select" button until
"Max setpoint"
flashes
Step 2: Press "Set" button to enter setting mode. "Max
"Max setpoint" continues
to flash while making
adjustments
Step 3: Press the "UP" or "DOWN" buttons to change the
"Max setpoint"
stops flashing
Step 4: Press "Set" button to confirm new "Max Setpoint"
setpoint) for the temperature setpoint:
"Max Setpoint" is displayed.
Setpoint" will flash to indicate setting mode.
maximum setpoint value. This will limit the
maximum setpoint the user can select. Note: The
maximum setpoint is approximately 180°F.
value and stop setting mode.
Appendix 10
83