General Competition Maintenance - Honda CR85 2006 Owner's Manual

General Competition Maintenance

Perform maintenance on firm, level ground using
the optional workstand, or equivalent support.
Use genuine Honda parts or their equivalent
when servicing your CR.
Clean parts in non-flammable (high flash point)
cleaning solvent (such as kerosene) when
disassembling. Lubricate any sliding surface,
O-rings, and seals before reassembling. Grease
parts by coating or filling where specified.
After any engine disassembly, always install new
gaskets, O-rings, cotter pins, piston pin clips,
snap rings, etc. when reassembling. After
reassembly, check all parts for proper installation
and operation.
All Pre-ride Inspection Items
Refer to Pre-ride Inspection in your Owner's
Manual, page 9 .
22 22
Servicing Your Honda Servicing Your Honda