Honda CR85 2006 Owner's Manual page 45

9. Apply a thin coat of Honda White Lithium
Grease, or an equivalent, to the sealing
surface.
10.Assemble the air cleaner and holder and put
the air cleaner retaining bolt through the
assembly.
11.Install the assembly into the air cleaner
housing with the tab (5) facing up and tighten
the bolt securely.
(5)
(5) tab
NOTICE
Improper installation of the air cleaner assembly
may allow dirt and dust to enter the engine and
cause rapid wear of the piston rings and cylinder.
12.Reinstall the seat (page 29), making sure it is
securely attached.
Air Cleaner
41
Servicing Your Honda