Table of Contents
Advertisement
4-5 Detergent injection control test mode
1) How to enter: Power ON -> While holding down the washing button, press the detergent selection button three times. ->
'DEt' displayed.
2) Pressing the rinsing button, 1, 2 and 1 will be displayed.
3) If you press the rinsing button, the above number is displayed. At this time, press the water temperature button to display
the current settings.
4) How to change the settings
- Up: Press the spin button to go up.
- Down: Press the reserve button to go down.
- Save after changes -> Press the operation button -> Auto power off and the value saved.
5) Set values
1. '1': On time for the liquid detergent sync motor for washing.
- Default: 30
- Range: 20 to 50
- Unit: 5
2. '1': On time for the liquid detergent sync motor for rinsing.
- Default: 40
- Range: 30 to 60
- Unit: 5
49
Advertisement
Table of Contents
