Table of Contents
Advertisement
3-2 Balanced spin
1) Motor operation in balanced spin cycles
- Spin sequence before changes
change region
Ascending speed
repeated at 5.45 rpm
Laundry
pulling region
- +Spin sequence after
changes
Laundry
pulling region
1. Divide the laundry attachment region into two levels (35, 95rpm) and shift the ascending speed from 35 to 95 rpm
between 5 rpm and 45 rpm every second to improve the condition of laundry attachment.
2. The unbalanced load is detected twice at 95 rpm and once in the region ascending to 350 rpm and once at 350 rpm.
3. In case of turn back due to being unbalanced, you should return not to the beginning of the balanced spin sequence
but to the laundry pulling region.
4. The balanced spin time is set to 2 minutes. When 350 rpm is passed, it is reduced by two minutes.
Program
39
Advertisement
Table of Contents
