Brocade Communications Systems 6505 Hardware Reference Manual page 38

DRAFT: BROCADE CONFIDENTIAL
4
Removing and replacing a power supply and fan assembly
1
2
3
4
FIGURE 7
CAUTION
Disassembling any part of the power supply voids the part warranty and regulatory certifications.
There are no user-serviceable parts inside the power supply and fan assembly. The cooling
system relies on pressurized air, do not leave either of the power supply and fan assembly slots
empty longer than two minutes when the Brocade 6505 is operating. If a power supply and fan
assembly fails, leave the power supply and fan assembly in the Brocade 6505 until it can be
replaced. Maintain both power supply and fan assembly in operational condition to provide
redundancy.
Table 4
required, if any.
TABLE 4
LED Color
No light
26
1
Filler panel
Power supply/fan assembly #1
Power supply/fan assembly LED
On/off switch
Nonport side of the Brocade 6505
describes the power supply and fan assembly status LED colors, behaviors, and actions
Power supply and fan assembly status LED behavior, description, and required actions
Description
Power supply and fan assembly is not receiving
power, or is off.
2 3 4 5
7
5 Power plug receptacle (with plug retainer)
6 Thumbscrew
7 Handle
Action Required
Verify that the power supply and fan
assembly is on and seated and the
power cord is connected to a
functioning power source.
Brocade 6505 Hardware Reference Manual
6
53-1002449-01