Saving A Document File Only; Hdd); Scan To Hdd" Screen - Sharp mxb381 Operation Manual

SAVING A DOCUMENT FILE ONLY (Scan to

HDD)

Scan to HDD is used to store a scanned document in the Main folder or a custom folder. Neither printing nor
transmission are performed.

"Scan to HDD" SCREEN

The following screen appears when the [Scan to HDD] tab is touched in document filing mode. Touch the keys below to
select Scan to HDD settings.
The current setting of each key appears to the right of the key.
(1) [File Information] key
Information can be appended to a file stored by Scan to
HDD. The settings are configured in the same way as file
information for "File".
☞
FILE INFORMATION
(2) [Special Modes] key
Use this key to select special modes for Scan to HDD.
☞
Special modes screen for Scan to HDD
(3) [Original] key
Touch this key to set the scanning size, storing size and
orientation of the original, and select 2-sided scanning
settings.
☞
[Original] key (page 6-19)
(4) [Exposure] key
Touch this key to select the exposure for scanning.
(5) [Resolution] key
Use this key to select the resolution that will be used
when the file is transmitted.
When "Long Size" is specified, only resolution settings of
300 X 300 dpi and under can be selected.
COPY IMAGE SEND
Ready to scan to HDD.
Press [Start] to scan original.
File Retrieve Scan to HDD
File
(1)
Original
Information
Exposure
Resolution
Colour Mode
(2)
Special Modes
(page 6-15)
(page 6-21)
DOCUMENT
FILING
HDD Status
Ex Data Access
Auto
Scan: A4 Store:
Auto
200X200dpi
Mono2
(6) [Colour Mode] key
Use this key to select the colour mode when storing a
document.
☞
[Colour Mode] key
(7) key
This key appears when a special mode or 2-sided
scanning is selected. Touch the key to display the
selected special modes.
6-18
DOCUMENT FILING
(3)
(4)
(5)
(6)
(7)
(page 6-20)
Contents