Sharp mxb381 Operation Manual page 140

Press the [START] key to scan the front side of the card.
5
To cancel scanning...
Press the [STOP] key (
Turn the card over and press the [START] key to scan the reverse side of the
card.
6
To cancel scanning...
Press the [STOP] key (
Place next original. Press [Start].
When finished, press [Read-End].
7
To cancel copying...
Press the [STOP] key (
• The original must be placed on the document glass.
• Copying is only possible on standard size paper.
• XY Zoom cannot be used when using this function.
• The image cannot be rotated when using this function.
To cancel card shot...
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Card Shot Settings
This is used to set the values to which the size returns when the [Size Reset] key is pressed. 25 mm to 210 mm (1" to 8-1/2")
can be entered for both the horizontal and vertical dimensions.
The factory default settings are 86 mm (3-3/8") for X (the width) and 54 mm (2-1/8") for Y (the height).
).
).
Touch the [Read-End] key.
Copying will begin.
Read-End
).
2-55
COPIER
Contents