Sharp mxb381 Operation Manual page 321

Place the original.
Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the
1
program.
When the original is a different size than the size setting, set the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Program] key.
☞
SPECIAL MODES
Program
Program A
3
Program C
Program E
Program G
Program I
Program K
Program : Program C
0123456789
Scan Internet Fax
Original
Exposure
Resolution
Special Modes
Address Review
4
File
Quick File
• The screen that appears will vary depending on the destination stored in the program.
• The mode cannot be changed here.
• Functions stored in the program cannot be cancelled here.
Press the [START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
5
When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
(page 4-65)
(1) (2)
OK
Program B
Program D
Program F
Program H
Program J
Program L
Fax USB Mem. Scan PC Scan
Auto
Scan: Send:
A4
Auto
Standard
Auto Reception
Fax Memory:100%
).
(page )
4-46
Retrieve the stored program.
(1) Touch the desired program key.
(2) Touch the [OK] key.
1
2
Select additional settings.
When a program is used, the following settings can be
additionally specified:
• Image settings: Original scan size*, send size
• Special modes: Timer Transmission, Card Shot, File, Quick
File, Own Name Select, Transaction Report
* When stored in the program, this cannot be additionally
specified.
4-68
FACSIMILE
Contents