Table of Contents
Advertisement
Quick Links
I N S T A L L A T I O N I N S T R U C T I O N S
Horizontal And Vertical Table Stands
and Accessories
Model: KTP-Series
The KTP-Series is a free standing, pole mount solution for multiple displays.
KTP-220 / KTP-225
BEFORE YOU BEGIN
CAUTION!
To prevent damage to the Kit, which could affect or void the Factory warranty, and to the equipment that will be
attached to it, thoroughly study all instructions and illustrations before you begin the installation.
•
If you have any questions about this installation, contact Chief.
Chief® and Centris™ are trademarks of Milestone AV Technologies. All rights reserved.
KTP-325
Chief, a products division of Milestone AV Technologies
6436 City West Parkway, Eden Prairie, MN 55344
• P: 800.582.6480 / 952.225.6000
• F:877.894.6918 / 952.894.6918
KTP-230
KTP-440 / KTP-445
KTP-320
8832-000142 RevL
2014 Milestone AV Technologies
www.chiefmfg.com
06/14
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CHIEF KTP Series
Summary of Contents for CHIEF KTP Series
- Page 1 • If you have any questions about this installation, contact Chief. Chief® and Centris™ are trademarks of Milestone AV Technologies. All rights reserved. 8832-000142 RevL Chief, a products division of Milestone AV Technologies...
- Page 2 PIPE CAP, 1.75 OD * Indicates an available optional accessory not included with above models. For additional information pertaining to available accessories contact a Chief Customer Service representative or visit us at www.chiefmfg.com. Quantity varies depending upon the number of displays being installed.
- Page 3 Installation Instructions Model: KTP-Series (160) (10 Includes 210, 220, 230) (180) (120) (200) (190) (20) (170) (130) (140) (30) (110) (100) (80) (50) (70) (60) (40) (90) Figure 1: Parts ASSEMBLY AND INSTALLATION (210) Mount Assembly (60) KTP-230 Assembly To assemble the KTP-230: (220) 1.
- Page 4 Model: KTP-Series Installation Instructions Display Installation Attach Centris Head to Flush Mount Display CAUTION! (230) CAUTION: If display uses a screw size other than those included in the kit, DO NOT use the screws Keep equal (220) provided. Using the wrong screws could result in distance between mount and damage to your monitor.
- Page 5 Installation Instructions Model: KTP-Series 6. Secure Centris head to display using four M4 x 20mm Phillips pan head screws (170) [if using Display 3/8" (190) spacers], or four M4 x 30mm Phillips pan Centris Head head screws (180) [if using 3/4" (200) spacers] (see Figure 11).
- Page 6 Display Adjustment The KTP Series mount allows horizontal, pitch, and rotational adjustment of each display. The KTP Series mount also allows a full 360 deg. of display rotation with a maximum pitch range of 15° up and 15° down. Figure 15: Display Pitch and Roll Adjustment...
- Page 7 Installation Instructions Model: KTP-Series...
- Page 8 Model: KTP-Series Installation Instructions...
Need help?
Do you have a question about the KTP Series and is the answer not in the manual?
Questions and answers