Table of Contents
Advertisement
Quick Links
TMP006EVM User Guide and Software Tutorial
This user's guide describes the characteristics, operation, and use of the TMP006EVM evaluation board. It
discusses how to set up and configure the software and hardware, and reviews various aspects of the
program operation. Throughout this document, the terms evaluation board, evaluation module, and EVM
are synonymous with the TMP006EVM. This document also includes an electrical schematic, printed
circuit board (PCB) layout drawings, and a parts list for the EVM.
.....................................................................................................................
1
2
3
4
5
1
2
TMP006EVM Hardware Setup
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Example .CSV Output File (Formatted and Displayed in Microsoft Excel
1
2
3
4
Excel, Microsoft, Windows are registered trademarks of Microsoft Corporation.
SPI is a trademark of Motorola Inc.
2
I
C is a trademark of NXP Semiconductors.
All other trademarks are the property of their respective owners.
SBOU109A - May 2011 - Revised October 2011
Submit Documentation Feedback
Contents
............................................................................................
........................................................................................
.........................................................................................
..............................................................................................
List of Figures
...............................................................................
............................................................................................
......................................................................................
...........................................................................................
.............................................................................................
.................................................................................
..............................................................................
.................................................................................................
............................................................................
..................................................................................
...................................................................................
............................................................................
.................................................................................
........................................................................................................
List of Tables
.................................................................................................
...........................................................................................
Copyright © 2011, Texas Instruments Incorporated
SBOU109A - May 2011 - Revised October 2011
..................................................................
.......................................................................
....................................................................
......................................................................
.......................................
)
®
.........................................
..........................................
TMP006EVM User Guide and Software Tutorial
User's Guide
2
3
7
8
11
2
3
4
5
7
8
8
9
9
10
11
12
13
14
15
16
17
18
19
2
6
6
7
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Texas Instruments TMP006EVM
Summary of Contents for Texas Instruments TMP006EVM
-
Page 1: Table Of Contents
SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial This user's guide describes the characteristics, operation, and use of the TMP006EVM evaluation board. It discusses how to set up and configure the software and hardware, and reviews various aspects of the program operation. -
Page 2: Overview
The TMP006EVM is a platform for evaluating the performance of the TMP006 under various conditions. The TMP006EVM consists of two PCBs. One board, the SM-USB-DIG, communicates with the user’s computer, provides power, and sends and receives appropriate digital signals to communicate with the TMP006. -
Page 3: Tmp006Evm Hardware Setup
The following documents provide information regarding Texas Instruments' integrated circuits used in the assembly of the TMP006EVM. This user's guide is available from the TI web site under literature number SBOU109A. Any letter appended to the literature number corresponds to the document revision that is current at the time of the writing of this document. -
Page 4: Tmp006Evm Board Block Diagram
TMP006 Cable Connector Connector Circuitry I C Interface Serial Interface (SPI) Figure 3. TMP006EVM Board Block Diagram SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated... -
Page 5: Tmp006 Test Board Schematic
C, and SPI signals are provided to the calibration header, H2, for use with the TMP006 calibration tools. Figure 4. TMP006 Test Board Schematic SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated... -
Page 6: Tmp006 Test Board Parts List
H1 connector on the TMP006 Test Board. This summary also identifies the signals that are used with the TMP006EVM along with the respective signal names. Table 3. Signal Definitions for H1 (10-Pin Female Socket) on TMP006EVM Board... -
Page 7: Tmp006Evm Hardware Overview
Signal SCLK TMP006EVM Hardware Overview If not already assembled, the basic hardware setup for the TMP006EVM involves connecting the TMP006 Test Board to the SM-USB-DIG and then connecting the USB cable. This section presents the details of this procedure. Electrostatic Discharge Warning... -
Page 8: Tmp006Evm Software Overview
United States and European regional settings. The software should function correctly on other Windows-based OSs. GUI Software Installation The TMP006EVM software is included on the CD that is shipped with the EVM kit. It is also available through the TMP006EVM product folder on the TI web site. -
Page 9: Tmp006Evm Software Installation Launch
TMP006EVM Software Overview www.ti.com The TMP006EVM software installer file then begins the installation process as shown in Figure Figure 8. TMP006EVM Software Installation Launch Follow the prompts as shown in Figure 9 to install the TMP006EVM GUI software. Figure 9. TMP006EVM GUI Software Installation Prompts The TMP006EVM GUI software is now installed. -
Page 10: Tmp006Evm Gui Software Default Configuration
With the TMP006EVM properly connected (see Figure 5), launch the EVM GUI software from the Start menu. It is located in a folder titled, TMP006EVM GUI Installer. The software should launch with a screen similar to that shown in Figure Figure 10. -
Page 11: Tmp006Evm Software Use
Figure 11. Hardware Error Message TMP006EVM Software Use This section discusses how to use the TMP006EVM software. The TMP006EVM GUI software has a primary window that is used to configure and read from the TMP006, along with two other windows that are used to access different features of the TMP006. -
Page 12: Read All Registers To Update Temperature
Registers tab (refer to Section 5.3). Figure 12. Read All Registers to Update Temperature SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated... -
Page 13: Make Changes To Tmp006 Registers
Write All Reg button, as shown in Figure Figure 13. Make Changes to TMP006 Registers SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated... -
Page 14: Write Changes To Tmp006 Registers
The Pending changes need to be written LED illuminates when there are changes that have not been written to the TMP006, as shown in Figure Figure 14. Write Changes to TMP006 Registers SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated... -
Page 15: Tmp006Evm Gui Software Registers Tab
This feature gives detailed information regarding the meaning of each bit. The Registers tab on the TMP006EVM GUI software is illustrated in Figure Figure 15. TMP006EVM GUI Software Registers Tab SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright ©... -
Page 16: Read Registers Continuously To Update Graphs
Press the Read Continuous button again to turn off this function. Figure 16 shows this process. Figure 16. Read Registers Continuously to Update Graphs SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated... -
Page 17: Enable Transient Correction Algorithm
Transient Correction Algorithm The accurate performance of the TMP006EVM is highly dependent on a stable local temperature. Degraded performance can be observed when local temperature transients are introduced into the system, because the infrared (IR) thermopile in the TMP006 is sensitive to conducted and radiated IR energy from below the sensor as well as radiated IR energy that comes from above the sensor. -
Page 18: Start Data Logging
Logging Data from the TMP006EVM The TMP006EVM software has the ability to save data collected by the TMP006 into a comma-separated value (.CSV) format file. To save data in this format, select Save Temperature Data from the USB Controls drop-down menu. -
Page 19: Example .Csv Output File
Figure 19. Example .CSV Output File (Formatted and Displayed in Microsoft Excel ® SBOU109A – May 2011 – Revised October 2011 TMP006EVM User Guide and Software Tutorial Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated... - Page 20 Revised Figure 19 for improved clarity NOTE: Page numbers for previous revisions may differ from page numbers in the current version. SBOU109A – May 2011 – Revised October 2011 Revision History Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
- Page 21 Evaluation Board/Kit Important Notice Texas Instruments (TI) provides the enclosed product(s) under the following conditions: This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards.
- Page 22 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
- Page 23 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments TMP006EVM...
Need help?
Do you have a question about the TMP006EVM and is the answer not in the manual?
Questions and answers