Advertisement
3
CONVERT THE SURFACE BURNERS
1. Remove grates and burner caps.
2. Using the 7 mm nut driver,
remove and replace the brass
orifice spud inside each burner
chimney as follows:
• Replace the large orifices with
the spuds that are stamped 104.
• Replace the small orifices with
the spuds that are stamped 82.
NOTE: There will be one
extra orifice spud when
converting a four burner cooktop.
CONVERTING TO LP GAS
or Converting Back to Natural Gas from LP
Top Grate
Burner Cap
4
CONVERT THE PRESSURE REGULATOR
WARNING: Do not remove the pressure
regulator from the cooktop.
1. Locate the pressure regulator under the rear
of the cooktop.
2. Use an adjustable wrench to remove the
nut from the pressure regulator.
NAT
3.Insert the LP Adapter into the nut.
NAT
LP
Adapter
Nut
4. Reinsert the assembly into the regulator and
attach the tie-on label to the regulator using the
string provided.
Gas Flow
into Range
LP
LP Adapter
Nut
LP
(continued next page)
21
Advertisement
