American Audio STK-106W Manual page 9

STK-106W
25. MAIN POWER SWITCH – This is the main power ON/OFF button. A white LED directly
beneath the MASTER OUTPUT VOLUME will glow indicating the power is ON. Before main
power is applied, be sure you have made all connections to the speaker. Remember to avoid
damaging pops to the speakers, the mixer is turned on first and turned off last.
26. MAIN POWER INLET – This connector is used to supply main power to the unit via the in-
cluded detachable power cord. The power connection uses an I.E.C. type connector, use
only the supplied polarized AC power cord. Use only a power cord that matches this type
of connection. Be sure to only connect this unit to a power outlet that matches the printed
power label on the unit. Never use a power when the ground prong has been removed or
broken off. The ground prong is used to reduce the risk of electrical shock in case of an
electrical short. This cord is designed to fit in one direction only. Do not attempt to force a
cord if it does not fit, be sure the cord is being inserted properly.
FUSE HOLDER – This housing stores the 5 amp GMA protective fuse. Always replace with
the exact same type fuse, unless otherwise instructed, by an authorized American Audio
service technician. Replacing with any other type of fuse than that of the recommended
fuse will void your unit warranty.
Satellite Speaker Rear Panel:
27. SPEAKON CONNECTION – The speaker includes a SpeakOn type connection that connects
to the included subwoofer, using the included SpeakOn cable.
©
American Audio - www.americanaudio.us - STK-106W - Instruction Manual Page 9
®
Controls and Features
®