American Audio STK-106W Manual page 8

STK-106W
14. CHANNEL 3/4 VOLUME - This knob is used to regulate CHANNELS 3/4 output volume.
Turning the knob in a clockwise direction will increase the volume level.
15. BALANCED 1/4" LINE LEVEL INPUT – This connection is designed to accept a
balanced line input signal from a mixer or other line level device with a balanced output
jack. Use a balanced cable when the signal cable length exceeds 15 feet, this will reduce
excessive signal loss. Be sure to connect only line level input devices such as mixers and
tape machines to this jack.
16. MIC 2/LINE LEVEL VOLUME - This knob is used to regulate the MIC 2/LINE LEVEL output
volume. Turning the knob in a clockwise direction will increase the volume level.
17. MIC 2 XLR/LINE INPUT – This jack will accept a XLR Input or 1/4". The volume output
level for this microphone will be controlled by the MIC 2 Volume knob. This connection is
designed to accept a balanced line input signal from a mixer or other line level device with
a balanced output jack. Use a balanced cable when the signal cable length exceeds 15
feet, this will reduce excessive signal loss. Be sure to connect only line level input devices
such as mixers and tape machines to this jack.
18. MIC 1 XLR/LINE INPUT – This jack will accept a XLR Input or 1/4". The volume output is
level for this microphone will be controlled by the MIC 1 Volume knob. This connection
designed to accept a balanced line input signal from a mixer or other line level device
with a balanced output jack. Use a balanced cable when the signal cable length exceeds
15 feet, this will reduce excessive signal loss. Be sure to connect only line level input
devices such as mixers and tape machines to this jack.
19. MIC/LINE LEVEL BUTTON - These buttons are used to switch between line level activity
and mic activity. When the button is pressed "IN", the Mic/Line Level Input Volume Knob
and Master Output Volume will control the output of the connected Mic. When the button
is depressed, the Mic/Line Level Input Volume Knob and Master Output Volume will control
the output of any device that is connected to the Mic/Line Level Input.
20. MIC 1/LINE LEVEL VOLUME - This knob is used to regulate the MIC 1/LINE LEVEL output
volume. Turning the knob in a clockwise direction will increase the volume level.
21. CHANNEL 1 BASS CONTROL – This knob is used to adjust the amount bass applied to
the output signal of Channel 1. Turning the knob in a counter-clockwise direction will
decrease the amount of bass applied to a channel signal, turning the knob in a clockwise
direction will increase the amount of bass applied to a channel signal.
22. CHANNEL 1 TREBLE CONTROL – This knob is used to adjust the amount treble applied
to the output signal of Channel 1. Turning the knob in a counter-clockwise direction
will decrease the amount of treble applied to a channel signal, turning the knob in a clockwise
direction will increase the amount of treble applied to a channel signal.
23. SPEAKON CONNECTION – The subwoofer includes a SpeakOn type connection that
connects to the included satellite speaker, using the included SpeakOn cable.
24. VOLTAGE SELECTOR SWITCH - Because power supplies vary from location to location a
voltage selector switch has been incorporated in the unit's design. This switch can select a
voltage input of 120v or 230v to accommodate the two major power source. Always be sure
to disconnect the power plug before changing the voltage.
©
American Audio - www.americanaudio.us - STK-106W - Instruction Manual Page 8
®
Controls and Features