Powered professional two-way sound reinforcement loudspeaker (17 pages)
Summary of Contents for American Audio XSP-A
Page 1
XSP-A Series Powered Professional Two-Way Sound reinforcement Loudspeaker mericAn udio 6122 S. Eastern Ave. Los Angeles, Ca. 90040 www.AmericanAudio.us 5/09...
The XSP-A Series is a wo-way active loudspeaker encased in a light weight cabinet. This speaker has been designed to be used as both a portable and a permanently installed unit. The speaker includes a poll mount slot and rubber feet on the bottom of the unit for portable applications and also includes rigging points on the top, bottom, and rear of the unit for permanent and flight installations.
Page 4
X SP-A Series Safety Precautions XSP-A Series loudspeaker can easily reproduce sound pressure levels (SPL) sufficient enough to cause sever and permanent hearing damage. A great degree of care should be taken to protect your ears to prolong exposure to SPL in excess of 85db.
Page 5
X SP-A Series Registration The XSP-A Series speakers carry a one year (365 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package.
Page 6
XSP-A Series and are used to support another speaker when they are stacked together. 6. RIggIng PoIntS – The XSP-A Series speaker has three rigging points. These points are to be used to “fly” or suspend the speaker in the air by some means. be sure to follow the “flying”...
Page 8
9. FUSe HoldeR – This housing stores the 2 amp GMA protective fuse. Always replace with the exact same type fuse, unless otherwise instructed, by an authorized American Audio ® service technician. Replacing with any other type of fuse than that of the recommended fuse will void your unit warranty.
Page 12
16. FUSe HoldeR – This housing stores the 5 amp GMA protective fuse. Always replace with the exact same type fuse, unless otherwise instructed, by an authorized American Audio ® service technician. Replacing with any other type of fuse than that of the recommended fuse will void your unit warranty.
20. FUSe HoldeR – This housing stores the 5 amp GMA protective fuse. Always replace with the exact same type fuse, unless otherwise instructed, by an authorized American Audio ® service technician. Replacing with any other type of fuse than that of the recommended fuse will void your unit warranty.
® designed to work with the XSP-A Series. The Z-APX/b is a heavy-duty bolt and may be used to secure the speaker to a cable or chain. The Z-APX/H is a heavy-duty eyebolt and is used to suspend or secure the speaker using safety cables.
= 6lbs, pipe diameter - 1 3/8” PXI bR15 - Wall Mounting brackets - This bracket is helpful for mounting the XSP-A Series speakers to a trussing setup or a wall. This is also an alternative to mounting it on a stand. These brackets bolt into the top and bottom of the speaker.
American Audio concludes, after inspection, affects the reliability of the ® product; if the product has been repaired or serviced by anyone other than the American Audio ® factory unless prior written authorization was issued to purchaser by American Audio ;...
Need help?
Do you have a question about the XSP-A and is the answer not in the manual?
Questions and answers