Raid Mode - Setup; Single Mode - Fantec MB-X2U31R Manual

6 6

RAID Mode - SETUP

STEP
SETUP

SINGLE MODE

The MB-X2U31R offers four different modes:
• the RAID modes RAID1, RAID0 Striping and RAID0 Spanning (BIG),
• the SINGLE mode.
Important notes in advance:
• Always create a backup of important data.
• Do not place any hard disks in the enclosure if the hard disks contain
important data that you have not backed up. If you accidentally make a
mistake when setting up the enclosure and inadvertently activate a RAID,
the partition tables of the hard disks will be overwritten according to the
setting and your data will be lost.
• Do not change the RAID mode (switch 4) if you have not previously backed up
important data on the hard disks.
• Do not press the recessed button (3) on the back if you have not previously
backed up important data on the hard disks.
RAID 0 RAID 1 BIG SINGLE