Fantec DB-R35DUS User Manual page 5

Hard Drive Assembly:
1. To remove the cover of
DB-R35DUS:
Please unscrew and
remove the screws on the
bottom of unit. Only one
side (top) of screws needs
to remove. Top side is the
side where power switch is.
Insert the screw-driver into
the bolt and push upward
to release the top cover.
2. Unfasten the screws on
HDD holder case and pull
backward to release the
HDD holder case.
Since using RAID1 (Mirror Mode) if install improperly, the HDD which already
contain DATA will be formatted. To prevent Data lost please follow step 3-1 for
installing under RAID 1 (Mirror Mode)
Installing Single or RAID0 Mode:
3. Insert both HDD1 and HDD2 into
both bays of HDD holder and secure
them with screws.