Table of Contents
Advertisement
Installing RAID1 Mode:
Installing this method, if first HDD already contain data.
Note: Two HDD must be identical in brand, size and model number.
3-1. Insert first HDD which contain data.
And fasten with screws.
3-2. Insert back the HDD holder back to DB-R35DUS
with first HDDs attached. Make sure the
connection of HDD holder and DB-R35DUS is
intact.
At this point, please connect DB-R35DUS to power source and turn on the unit. (no
need to connect to computer.) DB-R35DUS will automatically build a RIB table to
First HDD. This way is for DB-R35DUS to recognize the source HDD. After the RIB
table is written on to HDD, the error light indicator of second HDD will light. Power off
and remove the HDD holder to install the second HDD.
Advertisement
Table of Contents
