Fantec DB-R35DUS User Manual page 11

The LED panel in the front indicates accessing of HDD1, HDD2 and also when
rebuilding the data. Error LED lights up when HDD1 or HDD2 fail, rebuilding
incorrectly and HDD not present..
For installation of the DB-R35DUS, please refer to Hard Drive Assembly.
Note: For each time changing the "Mode" of DB-R35DUS, Please use RIB-Cleaner
program in our CD-ROM to clean the RIB table of the HDD.
Installation:
PC:
Before connecting to the PC please refer to our Hard Drive Assembly procedures for
RAID set-up.
If HDD is pre-installed by our vendor, user can plug directly to PC and start using the
unit. If wish to change the setting please refer to Hard Drive Assembly for correctly
way of setting.
1. Turn on PC and start Windows.
2. Connect (USB or 1394) DB-R35DUS and turn on the power.
3. Windows will search and install drive automatically.
4. Open "My Computer" and "external hard drive" will appear.
Remove the "external hard drive" from PC.
For safe removal of external hard drive, this is to prevent any data lost. Please
always follow the correct removal procedure.
1. Click the icon for external hardware in task bar.
2. Choose the hard drive wish to remove and confirm it.