Table of Contents
Advertisement
FLYWHEEL
BLADE
SCREWS
(2 per blade)
Figure 17
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
Periodic light dusting of the Wicker blades is
recommended. A feather duster will work best. Avoid
Mounting the Fan Blades
1. Attach Blades to the Rubber Flywheel using the
10-32 x 1/2" Flywheel Screws (Figure 17).
2. Make sure the screws securing the Blades to the
Flywheel are tight and that the Blades are properly
seated on the Flywheel.
Maintenance
Blade Cleaning
using water, cleansers, or harsh rags, which can warp
and ruin the blades.
10
INSTALLATION NOTE
Attach the fan blades after hanging the fan body and
wiring the fan to prevent blade breakage or damage.
INSTALLATION NOTE
Attach the Blades to the Rubber Flywheel using the
holes marked #5 for 5-blade application. For 4-blade
application, use the holes marked #4.
WARNING
Do not use water when cleaning your ceiling fan. It
could damage the motors or the blades and create
the possibility of electrical shock.
Advertisement
Table of Contents
