Installation Location - Canon imageFORMULA DR-C225 2 User Manual

Chapter 2 Important Safety
Instructions
###HOME > Chapter 2 Important Safety Instructions###
To ensure the safe operation of this scanner, be sure to read the safety
warnings and precautions described below.
Installation Location........................................................................... 10
AC Adapter .......................................................................................... 11
Moving the Scanner............................................................................ 11
Handling .............................................................................................. 12
Disposal............................................................................................... 13
When sending the scanner for repairs ............................................. 13

Installation Location

###HOME > Chapter 2 Important Safety Instructions > Installation
Location###
The performance of this scanner is affected by the environment in
which it is installed. Make sure that the location where the scanner is
installed meets the following environmental requirements.
Provide adequate space around the scanner for operation,

maintenance, and ventilation.
When scanning documents using the straight path, provide adequate

space in front of the scanner for scanned document output.
 Avoid installing the machine in direct sunlight. If this is unavoidable,
use curtains to shade the scanner.
Avoid locations where a considerable amount of dust accumulates.

 Avoid warm or humid locations, such as in the vicinity of a water
faucet, water heater, or humidifier. Avoid locations where ammonia
gas is emitted. Avoid locations near volatile or flammable materials,
such as alcohol or paint thinner.
 Avoid locations that are subject to vibration.
 Avoid exposing the scanner to rapid changes in temperature. If the
room in which the scanner is installed is cold but rapidly heated,
water droplets (condensation) may form inside the scanner. This may
result in a noticeable degradation in scanning quality. The following
conditions are recommended for optimal scanning quality:
Room temperature: 10°C to 32.5°C (50°F to 90.5°F)
10