Canon imageFORMULA DR-C225 2 User Manual page 16

When the scanner is turned on for the first time, the balloon
message shown below appears on the Windows task bar. If you
wait a while, automatic scanner recognition will end and the
scanner will become ready to use.
When the scanner is properly connected to the computer, the
(CaptureOnTouch) icon appears on the taskbar as follows.
If the taskbar icon appears as
connected to the computer. Check the status of the power and USB
cable.
or the scanner is not properly
Turning Off the Power
Press and hold the power button until the indicator goes out.
 After turning the scanner off, wait at least 10 seconds before
turning it back on.
If you will not be using the scanner for an extended period, you

should disconnect the power cord from the AC outlet for
safety.
The scanner's auto power off setting is enabled by default, and the
scanner will turn off automatically if it is not operated for 4 hours.
For details on how to disable this setting, see "Auto Power Off
Setting" on p.71.
16