Add Function - Safescan 2985-SX User Manual

6. ADDITIONAL COUNTING FUNCTIONS
1. BATCH COUNTING
Batch counting enables you to create equal stacks of a pre-defined number of banknotes.
CLR
• Press [BATCH] to enter batch number selection mode. The pre-set batch number will start with 100, this number is shown
on the top right of the screen.
• Pressing again will toggle between the pre-set batch numbers: 100
BATCH
off, the display shows '---'.
• To set any other batch number, press
until you have reached your desired batch number.
When a batch number has been set, the banknote counter will stop counting when the pre-set number of banknotes has been
reached. Remove the banknotes from the stacker, the banknote counter will automatically continue counting until again the
pre-set batch number has been reached.

2. ADD FUNCTION

When the ADD function is switched ON, the banknote counter will add the current count result to the previous count result.
CLR
Press to switch the Add function on. 'ADD' will be shown on the top middle on the screen. The banknote counter will
ADD
now add each count result to the previous count result.
Press the button to set the count to 0. Press
CLR
CUR
**** MIX
BATCH PCS
VAL
+1/+10
R:
S:M
PRINT
to increase the batch number by 1 (short press) or 10 (long press). Continue
+1/+10
CUR
**** MIX
PCS
BATCH
VAL
+1/+10
R:
S:M
PRINT
www.safescan.com
B:100
0
0
15-12-2015 12:05
50
ADD B:---
0
0
15-12-2015 12:05
again to switch the ADD function off.
ADD
MODE
CLR
ADD
REP
MENU
0. When the batch setting is
20 10
MODE
CLR
ADD
REP
MENU
ENGLISH