PROCEDURES
5
4
PROCEDURES
Vectors-To-Final
Approach Examples
Approach Example
Flying the Vectors Approach
With "vectors to final" selected,
the CDI needle will remain off center
until you're established on the final
approach course. With the approach
activated, the map page will display
an extension of the final approach
course in magenta (remember,
magenta is used to depict the active
leg of the flight plan) and "VTF" will
appear as part of the active leg on the
default NAV page (as a reminder that
the approach was activated with vec-
tors-to-final). In this example, we'll
assume ATC vectors result in a rec-
tangular course to intercept final, as
follows:
DO NOT USE FOR
NAVIGATION