Garmin GPS 400 Pilot's Manual And Reference page 48

DIRECT-TO
2
Selecting by
Facility or City
To select the direct-to destination by facility
name (shown above) or city location (shown
below), highlight the second or third line on the
direct-to waypoint page. Use the small (
d
and large ( ) right knobs to enter the facility
name or city. The identifier(s) for any matching
entries will appear on the top line of the page.
Selecting a Destination by Facility Name or City
In addition to selecting a destination by identifier, the select direct-to waypoint
page also allows you to select airports, VORs and NDBs by facility name or city
location. If duplicate entries exist for the entered facility name or city, additional
entries may be viewed by continuing to rotate the small right knob (
selection process. (See page 78 for more information on duplicate waypoints.)
Identifier, Symbol
and Region
Flight Plan
Field
To select a direct-to destination by facility name or city:
a
)
D
d
d
a
a
b
E
a
) during the
Facility Name
City
Nearest Airport
Field
E