Garmin GPS 400 Pilot's Manual And Reference page 19

Once the direct-to or flight plan is confirmed, the whole range of instrument
procedures is available to you. Departures (SIDs), arrivals (STARs), non-precision
and precision approaches are stored within the NavData card and available using
P
the (procedures) key.
To display the procedures page, press
The steps required to select and activate an approach, departure or arrival are
identical. In this introductory section, we'll show examples of the steps required to
select an approach, but keep in mind the same process also applies to departures
and arrivals.
To select an approach, departure or arrival:
E
a
a
In your flight plan or direct-to, the departure or arrival airport is replaced with
the sequence of waypoints contained within the selected procedure.
P
.
a
a
E
E
Press the
page. Rotate the large right knob (
select the desired option.
E
A window will appear to select the desired
procedure. Use the large right knob (
make your selection.
TAKEOFF TOUR
IFR Procedures
P
key to display the procedures
d
) to
d
) to