Garmin GPS 400 Pilot's Manual And Reference page 77

Vectors to Final
Let's take a second look at the "VOR/DME 21" approach into Forbes Field. Instead
of following the DME arc, ATC tells you to expect vectors onto the final approach
course. There are several ways to select "vectors to final" with the GPS 400. The first
two options below will normally require the least workload to accomplish:
• When the approach is first selected, choose "VECTORS" from the transitions
window.
• Load a full approach—including the IAF from the transitions window—as
described on page 56. When cleared, press
To-Final?". (See page 57.)
• Load the full approach as described on page 56. Use the
it twice) from the active flight plan page to select the desired leg of the
approach. (See page 55.)
To select "VECTORS" from the transitions window:
P
To activate vectors-to-final from the procedures page:
P
P
and select "Activate Vectors-
D
D
D
P
key (by pressing
PROCEDURES
Vectors-To-Final
Approach Example
4
Ž
a
Ž
b

b