Garmin GPS 400 Pilot's Manual And Reference page 50

DIRECT-TO
5 2
PROCEDURES
Direct-To
Approach Examples
Shortcuts
Œ
a

a

b
Shortcuts
Shortcuts are available when using the
d
a
of the small ( ) and large ( ) right knobs to enter the destination waypoint's iden-
tifier. A direct-to can be performed from any page displaying a single waypoint iden-
tifier (such as the WPT pages for airports and navaids) by simply pressing
E
. For pages that display a list of waypoints (e.g., the nearest airport page), you
must highlight the desired waypoint with the cursor before pressing the
To select an on-screen waypoint as a direct-to destination:
E
D E
Direct-to destinations may also be selected from the map page, by panning to the
desired destination location and pressing
navaid or user waypoint exists at the desired location, a waypoint named "+MAP"
will automatically be created at the location of the panning pointer.
To select a direct-to destination from the map page:
a
D
key, allowing you to bypass the use
D
r
d
D E
and (twice). If no airport,
r
d
D E
D E
D
and
D
key.