Garmin GPS 400 Pilot's Manual And Reference page 25

Section 1
NAV Pages
Main Page Groups
The GPS 400's main pages are divided into groups: NAV, WPT, and AUX. While
viewing any of these pages, selection of another page is a simple selection process
d
a
using the small ( ) and large (
NAV
6 available
pages (see
list below)
To select the desired page group, rotate the large right knob (
the desired group is displayed.
To select the desired page within the group, rotate the small right knob (
the desired page is displayed.
NAV Page Group
Default NAV NAVCOM
Map
The NAV page group includes six pages. While viewing any NAV page, rotate the
a
small right knob ( ) to select a different NAV page. You may find this selection
process convenient to cycle between the default NAV and map pages—two of the most
frequently used pages. Other pages are provided to list frequencies for your flight
plan, show your current position, display current satellite reception, and make vertical
navigation settings.
) right knobs.
WPT AUX
10 available 4 available
pages (see pages (see list
list on pg. 76) on pg. 111)
d
Satellite Status
Position
The bottom right corner of the screen indi-
cates which page group is currently being dis-
) until a page from
played (e.g., NAV or WPT), the number of
screens available within that group (indicated
by square icons) and the placement of the cur-
a
) until
rent screen within that group (indicated by a
highlighted square icon). To select a different
page within the group, rotate the small right
knob (
VNAV
This part of the screen is also used to display
the GPS 400's turn advisories (e.g., "Turn to
230°") and waypoint alerts (e.g., "Next DTK
230°") during flight plan and approach opera-
tions. See Section 4 for more information.
NAV PAGES
Page Groups
NAV Page Group
a
).
1