Summit 200 Series Switch Overview; Summit 200 Series Switches; Summit 200 Switch Front View - Extreme Networks Summit 200-24 Hardware Installation Manual

3

Summit 200 Series Switch Overview

This chapter describes the features and functionality of the Summit 200 series switches:
• Summit 200 Series Switches on page 41
• See "Evaluating and Meeting Mini-GBIC Requirements" on page 31 for mini-GBIC types and
distances. on page 43
• Port Connections on page 44

Summit 200 Series Switches

The Summit 200 series switches include the following switch models:
• Summit 200-24 switch
• Summit 200-48 switch
Both models of the Summit 200 switch are compact enclosures 1U in height (1.75 inches or 44.45 mm).
The Summit 200 provides either 24 or 48 autosensing 10BASE-T/100BASE-TX ports using RJ-45
connectors. The Summit 200 series also provides two 10/100/1000BASE-T Gigabit Ethernet uplink ports
using RJ-45 connectors and two optical ports that also allow Gigabit Ethernet uplink connections
through Extreme 1000BASE-SX, 1000BASE-LX, or 1000BASE-ZX Small Form Factor pluggable (SFP)
Gigabit Interface Connectors (GBICs)—also known as mini-GBICs—using LC optical fiber connectors.
Mini-GBICs are purchased separately. For more information, contact your Extreme Networks Sales
Representative.
The two uplink ports are combination ports. Each combination port can be either 10/100/1000BASE-T
using RJ-45 connectors or the optical port using mini-GBICs. These combination ports are described
further in "Summit 200 Automatic Failover" on page 44,

Summit 200 Switch Front View

The 24 port version of the Summit 200 is the Summit 200-24. Figure 5 shows the Summit 200-24 switch
front view. The 48 port version is the Summit 200-48, which is shown in Figure 6.
Consolidated "e" Series Hardware Installation Guide 41