Software Images; Full-Duplex Support - Extreme Networks Summit 200-24 Hardware Installation Manual

Software Images

Software Images
When you receive a new Extreme Networks switch, be aware that an the ExtremeWare ® software image
and a BootROM image has been pre installed at the factory. To verify the software image you are
running on your switch, use the command. The command displays the
show version show version
hardware and software versions currently running on the switch. To ensure that you have the latest
software and BootROM image, go to the support login portion of the Tech Support page at:
http://www.extremenetworks.com/services/
NOTE
If the information in the Release Notes that shipped with your switch differs from the information in this
guide, follow the Release Notes.

Full-Duplex Support

Extreme Networks switches provide full-duplex support for all ports. This means that frames can be
transmitted and received simultaneously, which, in effect, doubles the bandwidth that is available on a
link. Most ports on an Extreme Networks switch autonegotiate for half-duplex or full-duplex operation.
Gigabit Ethernet and 100BASE-FX ports operate in full-duplex mode only in accordance with technical
standards.
Consolidated "e" Series Hardware Installation Guide 19