Cleaning Solutions; Maintenance; Parts And Service - U.S. Products ADVANTAGE-200H Information & Operating Instructions

Hide thumbs Also See for ADVANTAGE-200H:

Table of Contents

INSPECTION:

Carefully unpack and inspect your ADVANTAGE-200H for shipping damage. Each machine is tested

and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You

should notify the carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very

thoroughly they could cause a build-up in the pump, lines, heat exchanger and/or quick disconnects.

Any problem caused by a chemical build-up is not covered by warranty. Use a neutral cleaner with a pH

between 5 and 10 to avoid premature wear of the pump, seals, and/or other components.

For optimum performance ﬂ ush the machine with clear water at the end of each working day. Once a

month, minimum, run a ﬂ ushing compound through the machine to break up any mineral or chemical

build-up that may have formed. The vacuum motor and the pump do not require any scheduled

maintenance; however, the motor may require replacement brushes after 1000 - 1500 hours. Clean

the body with an all-purpose detergent, and protect it with an automobile interior polish. Lubricate the

wheels, castors, and quick disconnects with an all purpose silicone spray.

Repairs, when required, should be performed by your authorized distributor who maintains an inventory of

original replacement parts and accessories. Call the distributor from whom you purchased this machine if

you need parts and service. Be sure to specify the machine model. Have your serial number handy.

(and be sure to register your warranty: go on-line to www.usproducts.com)

Serial Number: __________________

Model: ADVANTAGE-200H

Purchase Date:_____________

Write the name and phone number of your distributor:

_____________________________________

Table of Contents