Cleaning Solutions; Maintenance - U.S. Products KING COBRA 1200 PRO Information & Operating Instructions

INSPECTION:
Carefully unpack and inspect your KING COBRA-1200 PRO 230V for shipping damage. Each machine is
tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You
should notify the carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

Select a proper pre-spray for the surface to be cleaned, and apply the pre-spray. Use a neutral pH rinse
or detergent (6 to 10 pH) in the King Cobra to prevent premature wear of the pumps, seals, and other
components. Damage caused by the use of improper or strong chemicals is not covered by warranty.
Powdered chemicals are not recommended.

MAINTENANCE:

For optimum performance, fl ush the machine with clear water at the end of each working day. Once a
month, minimum, run a fl ushing compound through the machine to break up any mineral or chemical
build-up that may have formed. The vacuum motor, pump motors, and the pumps do not require any
scheduled maintenance; however, the motors may require replacement brushes after 1000 - 1500 hours,
and the high pressure pumps and unloader valves may require rebuild kits after 500 -1000 hours (refer
to machine part list for numbers). Clean the body with an all purpose detergent, and protect it with an
automobile interior polish. Lubricate the wheels, castors, and quick disconnects with an all purpose silicone
spray.
Record the serial number and model of your new extractor here:
(and be sure to register your purchase to activate your warranty)
Serial Number: __________________ Model: KING COBRA-1200 PRO_230V__
Purchase Date:_____________
Write the name and phone number of your distributor:
2