1. Manuals
  2. Brands
  3. U.S. Products Manuals
  4. Scrubber
  5. ADVANTAGE-400H-CE
  6. Information & operating instructions

U.S. Products ADVANTAGE-400H-CE Information & Operating Instructions

220 - 240v
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
ADVANTAGE-400H-CE
INFORMATION
OPERATING
INSTRUCTIONS
CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ
ALL SECTIONS OF THIS INSTRUCTION MANUAL
IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
1.
Always use a defoamer when foaming occurs to prevent vacuum motor damage.
2.
Connect the machine to a properly grounded outlet, only.
3.
Keep machine from rain and snow, extremes in temperatures, and store in a heated
location. Use the machine indoors. Do not use outdoors.
4.
Use approved chemicals only. NO SOLVENTS.
5.
Wear gloves or use rags when removing quick disconnects to prevent burns.
6.
Never use water above 54° C /130° F in the solution tank.
EXTRACTOR
220 - 240V
&
1
3/10 revised 11/11 Form No. 56041941

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADVANTAGE-400H-CE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for U.S. Products ADVANTAGE-400H-CE

Summary of Contents for U.S. Products ADVANTAGE-400H-CE

  • Page 1 ADVANTAGE-400H-CE EXTRACTOR 220 - 240V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY Always use a defoamer when foaming occurs to prevent vacuum motor damage.
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, and offi ces other than normal residential housekeeping purposes. When using any electrical appliance, basic precautions should always be followed, including the following: WARNING! To reduce the risk of fi...
  • Page 3 INSPECTION: Carefully unpack and inspect your ADVANTAGE-400H-CE for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the...
  • Page 4 SWITCH PLATE MODEL (1): This identifi es the model of your machine. MODEL VACUUM SWITCH (2): This push-button switch turns on the vacuum. The switch will illuminate when it is on. PUMP SWITCH (3): The pump switch turn the pump on and off, and it will illuminate when it is activated. HEAT SWITCH (4): The heat switch will turn on the heat, and it will illuminate when it is activated.
  • Page 5 SET-UP & OPERATION: 1. Inspect the machine, hoses, and cleaning tools for cleanliness and completeness. 2. Screw the lid on the recovery tank. Close the drain gate. 3. Fill the holding tank with clear water. NOTE: although this machine is designed to supply instant hot water, the addition of warm water to the solution tank would increase heater effi...
  • Page 6 FORM NO. 56041941 - ADVANTAGE 400H-CE revised 11/11...
  • Page 7 ADVANTAGE 400H-CE 230V Item Ref. No. Qty Description Item Ref. No. Qty Description 903USP Drain Gate TKC-6 Solution tank, white 187USP O-ring 17” Hose, pump inlet, 1/2” ID X 17” 187B Gasket 1113 Hose barb/elbow 185USP Nut, 1-1/2” 18” Hose, pump bypass, 3/8” ID X 18” 922USP Elbow, 90°, PVC 1115...
  • Page 8 ADVANTAGE 400H-CE TROUBLE SHOOTING: IF THIS OCCURS CHECK THIS Solution tank is empty, or fi lter is plugged up. NO SPRAY Clogged spray tip. Pump not running. Valve on wand not operating. Solution hose not completely connected to hose or to machine. This pump motor runs on AC voltage, so it should start running as soon as you turn on the switch.

Table of Contents