Table of Contents
Advertisement
Quick Links
ADVANTAGE-100H-SC
EXTRACTOR
120V
INFORMATION
&
OPERATING
INSTRUCTIONS
CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ
ALL SECTIONS OF THIS INSTRUCTION MANUAL
IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
2. Connect the machine to a properly grounded outlet of 20 amps or greater.
3. Keep machine from rain and snow, extremes in temperatures, and store in a heated
location. Use the machine indoors. Do not use outdoors.
4. Use approved chemicals only. NO SOLVENTS.
5. Never use water above 130º F/54º C in the solution tank.
1
3-2010
Advertisement
Table of Contents
Related Manuals for U.S. Products ADVANTAGE-100H-SC
Summary of Contents for U.S. Products ADVANTAGE-100H-SC
- Page 1 ADVANTAGE-100H-SC EXTRACTOR 120V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offi ces other than normal residential housekeeping purposes. When using any electrical appliance, basic precautions should always be followed, including the following: NOTE: Read all instructions before using this machine WARNING! -
Page 3: Cleaning Solutions
INSPECTION: Carefully unpack and inspect your ADVANTAGE-100H-SC for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the machine or parts. -
Page 4: Switch Plate
SWITCH PLATE MODEL (1): This identifi es the model of your Advantage machine. VACUUM SWITCH (2): MODEL This push-button switch turns on the vacuum. The switch will illuminate when it is on. PUMP SWITCH (3): The pump switch will illuminate when it is activated, and it will turn on the pump. HEAT SWITCH (4): The heat switch will illuminate when it is activated and will turn on the heater. -
Page 5: Setup And Operation
SET-UP & OPERATION: 1. Before each job, check your machine and tool(s) for cleanliness and completeness. 2. Fill the holding tank with clear water, and prespray with the detergent of your choice. If you choose to add a detergent to the solution tank, be sure to mix well, and always follow the use & dilution instructions on the chemical label. -
Page 7: Advantage-100H-Sc
ADVANTAGE-100H-SC PART LIST 120V ITEM PART No DESCRIPTION ITEM PART No. DESCRIPTION Drain Gate 2175 Lid, solution tank O-ring Chain, 8” 187B Washer, rubber TKC-6 Solution Tank Nut, 1-1/2” Retainer, for power cord pigtail Hose Barb, vacuum inlet 2155 Pig-tail, power cord, 2 ft... -
Page 8: Troubleshooting
Advantage-100H-SC TROUBLE SHOOTING: IF THIS OCCURS CHECK THIS Solution tank is empty, or fi lter is plugged up. NO SPRAY Clogged spray tip. Pump not running. Valve on wand not operating. Solution hose not completely connected to hose or to machine. - Page 9 ADV ANT ANT AGE-100H AGE-100H AGE-100H AGE-100H AGE-100H EXTRACTOR EXTRACTOR EXTRACTOR EXTRACTOR EXTRACTOR 120V 120V 120V 120V 120V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1.
- Page 10 IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes. When using any electrical appliance, basic precautions should always be followed, including the following: NOTE: Read all instructions before using this machine.
-
Page 11: Serial Number
INSPECTION: Carefully unpack and inspect your ADVANTAGE-100H for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the machine or parts. CLEANING SOLUTIONS: We recommend liquid cleaning chemicals. - Page 12 SWITCH PLATE MODEL (1): This identifies the model of your Advantage machine. VACUUM SWITCH (2): MODEL This push-button switch turns on the vacuum. The switch will illuminate when it is on. PUMP SWITCH (3): The pump switch will illuminate when it is activated, and it will turn on the pump. HEAT SWITCH (4): The heat switch will illuminate when it is activated and will turn on the heater.
- Page 13 SET-UP & OPERATION: 1. Inspect the machine, hoses, and cleaning tools for cleanliness and completeness. 2. Screw the lid on the recovery tank. Close the drain gate. 3. Fill the holding tank with clear water. Connect your tool and hoses. NOTE: although this machine is designed to supply instant hot water, the addition of warm water to the solution tank would increase heater efficiency.
- Page 15 ADVANTAGE-100H PART LIST 120V ITEM PART No DESCRIPTION ITEM PART No. DESCRIPTION Drain Gate Hose, 3/8” X 11-1/2” 187B Gasket 207A Filter, pump inlet O-ring 2175 Lid, solution tank Nut, 1-1/2” Chain, 8” Hose Barb, vacuum inlet Solution Tank 1074 Gasket Retainer, for power cord pigtail 2086...
- Page 16 Advantage-100H TROUBLE SHOOTING: IF THIS OCCURS CHECK THIS Solution tank is empty, or filter is plugged up. NO SPRAY Clogged spray tip. Pump not running. Valve on wand not operating. Solution hose not completely connected to hose or to machine. This pump has a built-in pressure switch, so it only runs when you release the pressure by spraying.
Need help?
Do you have a question about the ADVANTAGE-100H-SC and is the answer not in the manual?
Questions and answers