Cleaning Solutions; Maintenance; Parts And Service - U.S. Products ADVANTAGE-100H-SC Information & Operating Instructions

INSPECTION:
Carefully unpack and inspect your ADVANTAGE-100H-SC for shipping damage. Each machine is tested
and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You
should notify the carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very thoroughly
they could cause a build-up in the pump, lines, heat exchanger and/or quick disconnects. Any problem
caused by a chemical build-up is not covered by warranty. Use a neutral cleaner with a pH between 5
and 10 to avoid premature wear of the pump, seals, and/or other components.

MAINTENANCE:

For optimum performance fl ush the machine with clear water at the end of each working day. Once a
month, minimum, run a fl ushing compound through the machine to break up any mineral or chemical
build-up that may have formed. The vacuum motor and the pump do not require any scheduled main-
tenance; however, the motor may require replacement brushes after 1000 - 1500 hours. Clean the body
with an all-purpose detergent, and protect it with an automobile interior polish. Lubricate the wheels,
castors, and quick disconnects with an all purpose silicone spray.

PARTS AND SERVICE:

Repairs, when required, should be performed by your authorized distributor who maintains an inventory
of original replacement parts and accessories. Call the distributor from whom you purchased this machine
if you need parts and service. Be sure to specify the machine model. Have your serial number handy.
(and be sure to register your warranty: go on-line to www.usproducts.com)
Serial Number: __________________
Model: ADVANTAGE-100H-SC
Purchase Date:_____________
Write the name and phone number of your distributor:
_____________________________________
_____________________________________
3